x
x

Add a comment

Device: KeyMander 2

Stardew Vally

Can u please make the KEYMANDER compatible with Stardew Vally for series x I bought it almost specifically for this reason and sad it doesn’t work if anyone could do it and share the code I’d even pay them.

01/07/2023 8:42 PM

 Technically, all Xbox games would be supported by the K2. However, you have to keep in mind that this is an emulator. This means that moving the mouse will simply emulate the right analog stick as an Xbox controller. If you are currently on a screen that does move the cursor with the right analog stick, please ensure that you are using the USB cable that came in the box as the USB that is connecting your Xbox controller to the controller port on the K2.


This should even work on the default Xbox profile.

01/09/2023 9:49 AM

Just noticed that you mentioned Xbox Series X on this thread. If you are using the controller that came on the Series X, the new gen controllers now use USB-C which is not supplied in the K2's box. However, you are still required to use a charge and sync cable.


You can quickly test to see if you have the proper cable by powering off your controller and connecting directly to the console via USB.

  • If the controller turns on by itself, it is a charge and sync cable.
  • If the controller does not turn on by itself and requires you to press the home button, it is not a charge and sync cable.


If you happen to have one of the older Xbox One gen controllers, you can use that controller along with the USB cable that came in the box as that is a charge and sync cable.

01/09/2023 9:54 AM

Add a comment

Welcome,